• 【Water Heater Flusher & Anode Rod】You will receive 1 RV water heater tank flusher, 2 anode rods, and 1 seal tape. The scale condensed on the heat pipe will become thicker and thicker, affecting the heating speed and power consumption. The flusher quickly removes lime deposits from the bottom of the water heater. Regular annual replacement of the anode rod can reduce the corrosion in the tank and extend the life of the water heater.
• 【 High-Quality Anode Rod】Our RV anode rod is made of magnesium AZ63 alloy, non-toxic and odorless. It can effectively inhibit limescale condensation on the inner wall and on the heat pipe. Regular replacement of RV hot water heater anode rod helps to prevent you from spending a lot of money to replace the RV water heater. Anode rod size is 9 ¼" long, ¾" diameter with ¾" NPT thread, installation with 1-1/16" socket (socket not included), Compatible with Suburban and Mor-Flo Water Heaters.
• 【Strong Water Flusher】This RV hot water tank flush wand tip is very small and curved to reach into the tank. The nozzle is removable and when you remove the nozzle by turning it counterclockwise, the flushers can spray water in 4 directions with a strong stream of water to quickly clean out all the dead spots in the tank. When you use the nozzle, you can also rotate the nozzle to change its water outlet surface to suit various occasions.
• 【Multifunctional Flusher】The front end of the RV tank cleaning wand is made of stainless steel with a non-skid handle. Equipped with a 1/2 inch quick connect adapter and a 3/4 inch garden hose adapter, it can be used directly with a garden hose, which is very convenient. You can press the on/off lever and push it forward to lock it in the open position.
• 【Use Precautions】Before you are ready to maintain the water heater tank, be sure to turn off the water heater, cool the hot water, and release the pressure in the tank! To prevent you from injury, and splashing of sewage, please perform this operation. Wrapping PTFE seal tape around the top of the anode rod nut will allow it to be installed on the tank a little tighter.